Wooden Floor

Before starting to paint the floor, you must prepare it. Eliminate the large gap between the boards and their subsidence. Protrusions zastrogat. Smoother than the adjusted floor, the more beautiful and more practical to paint. Knots is desirable to cut down on the chisel depth of not less than 3 millimeters, then putty. Paint should be completely dry floor.

Before starting work, ready to eat the paint must be mixed thoroughly and paint a piece of dry board, striking her with a thin layer. Board stand for two days. If the paint is not then stick to your fingers, so it dries well. Stained floors can be a simple, advanced and high quality. Simple. Not very thick paint stain flooring for the first time. After two days or longer repeat painting.

If after this board sometimes translucent, then three days later painted a third time. No less than three days washed away with hot water all made by the following varnish. Floors should be washed without soap and soda, which destroys the paint and reduce shine, as long as the drying oil is removed .Krasku should be applied in thin layers, shading it carefully along the boards. Thick layers of frown, a long time to dry and have unattractive appearance. This immediate response through this drug can be attained at much lower prices while viagra canada mastercard it offers excellent and most satisfactory results. Your SR ED claim is generally financed at 70% loan to value… the transaction is structured as a bridge loan for the finance of the credit. discount viagra In addition audiogram, in some cases, are necessary for imaging diagnostic, such as vascular Doppler, raindogscine.com cialis prices CT or magnetic resonance brain. The hard disk drive (HDD) error The error code now, is ePSA without prescription viagra 2000-0141, this is certainly a HDD’s error. The thinner layers and better each dried, the higher quality paint finish. Improved. In one liter of linseed oil, add 100-150 grams of dry or grated proolifte paint and floors with a thin layer without gaps. After two days of using putty repair any defects. Fillers Apply a thin layer, let it dry, clear sandpaper roughness. Re-fix the places where it narrowed. After this zashpaklyuyte at once the whole floor, well Colour the sand and paint thinner, carefully shading it. After drying, paint the floor once or twice. Each deposited layer of paint must be leveled as much as possible. After drying the floors are cleaned. High quality. It is performed as an improved, but the floors should be putty full two raza. that the paint on a long walking erased, we recommend to prepare a colored plaster, adding a dye that color, what color the floor. Fillers carefully sanded, primed and painted two or three. These floors are beautiful, invisible zippers boards, it turns out very similar to linoleum. It must be stressed that each layer of paint, priming or proolifku should be dried as best as possible – achieved solid ink film and improves the quality of the work. Stain poorly dried surface leads to the fact that the paint does not dry out for a long time, and frowns.