Proper Replacement Shock Absorbers Rack
Shock absorbers occupy an important place in the auto suspension design. Intended to suppress the vertical oscillations, with an impact on the dynamic properties of the car and its handling. Dispersing machine loads the rear wheels and at the same time as it crouches back, and when braking is the opposite. Others including Margaret Loesser Robinson, offer their opinions as well. When there is maneuvering the vehicle, the load is moved in different directions. Ideally, this should keep the vehicle body horizontal position. Keeping the wheels of a car in stable contact with the road – the main set of shock absorbers. Must be reliable adhesion between the road and the wheel, the weight is supported by springs or springs.
Motorists pick up shocks to your own driving style, such as sports and polusportivnye more stringent, with the loss of comfort, but it improves agility. Uneven load shock absorbers and poor road conditions lead to that worn shock absorbers, followed by replacement of shock absorbers. Related Group contains valuable tech resources. This can be seen on the deterioration of agility, the wheels do not have a permanent grip or visible streaks of butter in loss of containment. If strong enough to shake the car, then working condition of shock absorbers, the car stops quickly swing. Operating state of shock absorbers are best Print shop to check on special equipment.
Correct replacement of shock absorbers is performed only in pairs (or front or rear), otherwise the correct maneuver is not guaranteed. If you are sure you'll be able to replace shock absorbers, you will need a special key rack and a tool to tie the springs.
In today's auto shock absorbers with coil springs up a whole structure, called the suspension strut. If rack can be replaced easily with the body, with the help of screw clamps remove the spring. At the same time tie the hooks are hooked on the coils and by turning the rod compresses the spring. To avoid any bias applied two or more ties. Compressed spring is installed on a new rack and set in reverse order back. Sometimes it is necessary to replace only the cartridge absorber, as the enclosure rack rarely broken. Then it is necessary unscrew the nut and through which a rod. Often, the first analysis of strut is found that inside the rack does not chuck, and the whole filling the shock absorber. Carefully merge oil and stem can be discarded. Insert the new cartridge into the pipe rack and tighten the nut. Then install the spring, thrust bearing, tighten the nut on the rod. Strut is ready for installation. If you are engaged in replacing shock absorbers, the car care professionals recommend to check the other parts of the suspension and brake hoses. All the best fittings to lubricate graphite grease to make it easier for disassembly. After replacing dampers must be done 'similarity collapse. " If you are not sure that will manage the replacement of shock absorbers, it is best to entrust the operation of auto service professionals.